4.11 Quelques spécificités liées aux OS

The following sections indicate some of the issues that have been observed to occur on particular systems when installing MySQL from a source distribution.

4.11.1 Solaris

On Solaris, you may run into trouble even before you get the MySQL distribution unpacked! Solaris tar can't handle long file names, so you may see an error like this when you unpack MySQL:

x mysql-3.22.12-beta/bench/Results/ATIS-mysql_odbc-NT_4.0-cmp-db2,
informix,ms-sql,mysql,oracle,solid,sybase, 0 bytes, 0 tape blocks
tar: directory checksum error

In this case, you must use GNU tar (gtar) to unpack the distribution. You can find a precompiled copy for Solaris at http://www.mysql.com/Downloads/.

Sun native threads work only on Solaris 2.5 and higher. For 2.4 and earlier versions, MySQL will automatically use MIT-pthreads. 4.9 Remarques sur MIT-pthreads.

If you get the following error from configure:

checking for restartable system calls... configure: error can not run test
programs while cross compiling

This means that you have something wrong with your compiler installation! In this case you should upgrade your compiler to a newer version. You may also be able to solve this problem by inserting the following row into the config.cache file:

ac_cv_sys_restartable_syscalls=${ac_cv_sys_restartable_syscalls='no'}

If you are using Solaris on a SPARC, the recommended compiler is egcs 1.1.2 or newer. You can find this at http://egcs.cygnus.com/. Note that egs 1.1.1 and gcc 2.8.1 don't work reliably on SPARC!

The recommended configure line when using egcs 1.1.2 is:

shell> CC=gcc CFLAGS="-O6" 
       CXX=gcc CXXFLAGS="-O6 -felide-constructors -fno-exceptions -fno-rtti" 
       ./configure --prefix=/usr/local/mysql --with-low-memory

If you have the Sun Workshop 4.2 compiler, you can run configure like this:

CC=cc CFLAGS="-xstrconst -Xa -xO4 -native -mt" CXX=CC CXXFLAGS="-xO4 -native -noex -mt" ./configure --prefix=/usr/local/mysql

shell> CC=cc CFLAGS="-Xa -fast -xO4 -native -xstrconst -mt" \
       CXX=CC CXXFLAGS="-noex -XO4 -mt" \
       ./configure

You may also have to edit the configure script to change this line:

#if !defined(__STDC__) || __STDC__ != 1

to this:

#if !defined(__STDC__)

If you turn on __STDC__ with the -Xc option, the Sun compiler can't compile with the Solaris `pthread.h' header file. This is a Sun bug (broken compiler or broken include file).

If mysqld issues the error message shown below when you run it, you have tried to compile MySQL with the Sun compiler without enabling the multi-thread option (-mt):

libc internal error: _rmutex_unlock: rmutex not held

Add -mt to CFLAGS and CXXFLAGS and try again.

If you get the following error when compiling MySQL with gcc, it means that your gcc is not configured for your version of Solaris!

shell> gcc -O3 -g -O2 -DDBUG_OFF  -o thr_alarm ...
./thr_alarm.c: In function `signal_hand':
./thr_alarm.c:556: too many arguments to function `sigwait'

The proper thing to do in this case is to get the newest version of egcs and compile it with your current gcc compiler! At least for Solaris 2.5, almost all binary versions of gcc have old, unusable include files that will break all programs that use threads (and possibly other programs)!

Solaris doesn't provide static versions of all system libraries (libpthreads and libdl), so you can't compile MySQL with --static. If you try to do so, you will get the error:

ld: fatal: library -ldl: not found

If too many processes try to connect very rapidly to mysqld, you will see this error in the MySQL log:

Error in accept: Protocol error

You might try starting the server with the --set-variable back_log=50 option as a workaround for this.

If you are linking your own MySQL client, you might get the following error when you try to execute it:

ld.so.1: ./my: fatal: libmysqlclient.so.#: open failed: No such file or directory

The problem can be avoided by one of the following méthodes:

• Link the client with the following flag (instead of -Lpath): -Wl,r/full-path-to-libmysqlclient.so.
• Copy libmysqclient.so to `/usr/lib'.
• Add the pathname of the directory where libmysqlclient.so is located to the LD_RUN_PATH environment variable before running your client.

4.11.2 Solaris 2.7

You can normally use a Solaris 2.6 binary on Solaris 2.7. Most of the Solaris 2.6 issues also apply for Solaris 2.7.

Solaris 2.7 has some bugs in the include files. You may see the following error when you use gcc:

/usr/include/widec.h:42: warning: `getwc' redefined
/usr/include/wchar.h:326: warning: this is the location of the previous
definition

If this occurs, you can do the following to fix the problem:

Copy /usr/include/widec.h to .../lib/gcc-lib/os/gcc-version/include and change line 41 from:

#if     !defined(lint) && !defined(__lint)

to

#if     !defined(lint) && !defined(__lint) && !defined(getwc)

Alternatively, you can edit `/usr/include/widec.h' directly. Either way, after you make the fix, you should remove `config.cache' and run configure again!

If you get errors like this when you run make, it's because configure didn't detect the `curses.h' file (probably because of the error in /usr/include/widec.h:

In file included from mysql.cc:50:
/usr/include/term.h:1060: syntax error before `,'
/usr/include/term.h:1081: syntax error before `;'

The solution to this is to do one of the following steps:

• Edit `/usr/include/widec.h' as indicted above and rerun configure
• Remove the #define HAVE_TERM line from `config.h' file and run make again.
• Configure with CFLAGS=-DHAVE_CURSES CXXFLAGS=-DCURSES ./configure

4.11.3 Solaris x86

If you are using gcc or egcs on Solaris x86 and you experience problems with core dumps under load, you should use the following configure command:

shell> CC=gcc CFLAGS="-O6 -fomit-frame-pointer" \
       CXX=gcc \
       CXXFLAGS="-O6 -fomit-frame-pointer -felide-constructors -fno-exceptions -fno-rtti" \
       ./configure --prefix=/usr/local/mysql

This will avoid problems with the libstdc++ library and with C++ exceptions.

If this doesn't help, you should compile a debug version and run it with a trace file or under gdb. G.1 Debugguer un serveur MySQL.

4.11.4 SunOS 4

On SunOS 4, MIT-pthreads is needed to compile MySQL, which in turn means you will need GNU make.

Some SunOS 4 systems have problems with dynamic libraries and libtool. You can use the following configure line to avoid this problem:

shell> ./configure --disable-shared --with-mysqld-ldflags=-all-static

When compiling readline, you may get warnings about duplicate defines. These may be ignored.

When compiling mysqld, there will be some implicit declaration of function warnings. These may be ignored.

4.11.5 Linux (Toutes versions de Linux)

MySQL uses LinuxThreads on Linux. If you are using an old Linux version that doesn't have glibc2, you must install LinuxThreads before trying to compile MySQL. http://www.mysql.com/Downloads/Linux

If you can't start mysqld or if mysql_install_db doesn't work, please continue reading! This only happens on Linux system with problems in the LinuxThreads or libc/glibc libraries. There are a lot of simple workarounds to get MySQL to work! The simplest is to use the binary version of MySQL (not the RPM) for Linux x86. One nice aspect of this version is that it's probably 10% faster than any version you would compile yourself! 10.3 Comment la compilation et le link affecte la vitesse de MySQL.

One known problem with the binary distribution is that with older Linux systems that use libc (like RedHat 4.x or Slackware), you will get some non-fatal problems with hostname resolution 4.6.3.1 Linux notes.

isamchk hangs with libc.so.5.3.12. Upgrading to the newest libc fixes this problem.

When using LinuxThreads you will see a minimum of three processes running. These are in fact threads. There will be one thread for the LinuxThreads manager, one thread to handle connections, and one thread to handle alarms and signals.

If you see a dead mysqld daemon process with ps, this usually means that you have found a bug in MySQL or you have got a corrupted table. 18.1 Que faire si MySQL plante constamment?.

If you are using LinuxThreads and mysqladmin shutdown doesn't work, you must upgrade to LinuxThreads 0.7.1 or newer.

If you are using RedHat, you might get errors like this:

/usr/bin/perl is needed...
/usr/sh is needed...
/usr/sh is needed...

If so, you should upgrade your version of rpm to `rpm-2.4.11-1.i386.rpm' and `rpm-devel-2.4.11-1.i386.rpm' (or later).

You can get the upgrades of libraries to RedHat 4.2 from ftp://ftp.redhat.com/updates/4.2/i386. Or http://www.sunsite.unc.edu/pub/Linux/distributions/redhat/code/rpm/ for other distributions.

If you are linking your own MySQL client and get the error:

ld.so.1: ./my: fatal: libmysqlclient.so.4: open failed: No such file or directory

when executing them, the problem can be avoided by one of the following méthodes:

• Link the client with the following flag (instead of -Lpath): -Wl,r/path-libmysqlclient.so.
• Copy libmysqclient.so to `/usr/lib'.
• Add the pathname of the directory where libmysqlclient.so is located to the LD_RUN_PATH environment variable before running your client.

If you are using the Fujitsu compiler (fcc / FCC) you will have some problems compiling MySQL because the Linux header files are very gcc oriented.

The following configure line should work with fcc/FCC:

CC=fcc CFLAGS="-O -K fast -K lib -K omitfp -Kpreex -D_GNU_SOURCE -DCONST=const 
-DNO_STRTOLL_PROTO" CXX=FCC CXXFLAGS="-O -K fast -K lib  -K omitfp -K preex 
--no_exceptions --no_rtti -D_GNU_SOURCE -DCONST=const -Dalloca=__builtin_alloca 
-DNO_STRTOLL_PROTO '-D_EXTERN_INLINE=static __inline'" ./configure 
--prefix=/usr/local/mysql --enable-assembler --with-mysqld-ldflags=-all-static 
--disable-shared --with-low-memory

4.11.5.1 Linux-x86

MySQL requires libc version 5.4.12 or newer. It's known to work with libc 5.4.46. glibc version 2.0.6 and later should also work. There have been some problems with the glibc RPMs from RedHat so if you have problems, check whether or not there are any updates! The glibc 2.0.7-19 and 2.0.7-29 RPMs are known to work.

On some older Linux distributions, configure may produce an error like this:

Syntax error in sched.h. Change _P to __P in the /usr/include/sched.h file.
See the Installation chapter in the Reference Manual.

Just do what the error message says and add an extra underscore to the _P macro that has only one underscore, then try again.

You may get some warnings when compiling; those shown below can be ignored:

mysqld.cc -o objs-thread/mysqld.o
mysqld.cc: In function `void init_signals()':
mysqld.cc:315: warning: assignment of negative value `-1' to `long unsigned int'
mysqld.cc: In function `void * signal_hand(void *)':
mysqld.cc:346: warning: assignment of negative value `-1' to `long unsigned int'

In Debian GNU/Linux, if you want MySQL to start automatically when the system boots, do the following:

shell> cp support-files/mysql.server /etc/init.d/mysql.server
shell> /usr/sbin/update-rc.d mysql.server defaults 99

mysql.server can be found in the `share/mysql' directory under the MySQL installation directory, or in the `support-files' directory of the MySQL source tree.

If mysqld always core dumps when it starts up, the problem may be that you have an old `/lib/libc.a'. Try renaming it, then remove `sql/mysqld' and do a new make install and try again. This problem has been reported on some Slackware installations. RedHat 5.0 has also a similar problem with some new glibc versions. 4.11.5.2 RedHat 5.0.

If you get the following error when linking mysqld, it means that your `libg++.a' is not installed correctly:

/usr/lib/libc.a(putc.o): In function `_IO_putc':
putc.o(.text+0x0): multiple definition of `_IO_putc'

You can avoid using `libg++.a' by running configure like this:

shell> CXX=gcc ./configure

4.11.5.2 RedHat 5.0

If you have any problems with MySQL on RedHat, you should start by upgrading glibc to the newest possible version!

If you install all the official RedHat patches (including glibc-2.0.7-19 and glibc-devel-2.0.7-19), both the binary and source distributions of MySQL should work without any trouble!

The updates are needed since there is a bug in glibc 2.0.5 in how pthread_key_create variables are freed. With glibc 2.0.5, you must use a statically-linked MySQL binary distribution. If you want to compile from source, you must install the corrected version of LinuxThreads from http://www.mysql.com/Downloads/Linux or upgrade your glibc.

If you have an incorrect version of glibc or LinuxThreads, the symptom is that mysqld crashes after each connection. For example, mysqladmin version will crash mysqld when it finishes!

Another symptom of incorrect libraries is that mysqld crashes at once when it starts. On some Linux systems, this can be fixed by configuring like this:

shell> ./configure --with-mysqld-ldflags=-all-static

On Redhat 5.0, the easy way out is to install the glibc 2.0.7-19 RPM and run configure without the --with-mysqld-ldflags=-all-static option.

For the source distribution of glibc 2.0.7, a patch that is easy to apply and is tested with MySQL may be found at:

http://www.mysql.com/Download/Linux/glibc-2.0.7-total-patch.tar.gz

If you experience crashes like these when you build MySQL, you can always download the newest binary version of MySQL. This is statically-linked to avoid library conflicts and should work on all Linux systems!

MySQL comes with an internal debugger that can generate trace files with a lot of information that can be used to find and solve a wide range of different problems. G.1 Debugguer un serveur MySQL.

4.11.5.3 RedHat 5.1

The glibc of RedHat 5.1 (glibc 2.0.7-13) has a memory leak, so to get a stable MySQL version, you must upgrade glibc to 2.0.7-19, downgrade glibc or use a binary version of mysqld. If you don't do this, you will encounter memory problems (out of memory, etc., etc.). The most common error in this case is:

Can't create a new thread (errno 11). If you are not out of available
memory, you can consult the manual for any possible OS dependent bug

After you have upgraded to glibc 2.0.7-19, you can configure MySQL with dynamic linking (the default), but you cannot run configure with the --with-mysqld-ldflags=-all-static option until you have installed glibc 2.0.7-19 from source!

You can check which version of glibc you have with rpm -q glibc.

4.11.5.4 Linux-SPARC

In some implementations, readdir_r() is broken. The symptom is that SHOW DATABASES always returns an empty set. This can be fixed by removing HAVE_READDIR_R from `config.h' after configuring and before compiling.

Some problems will require patching your Linux installation. The patch can be found at http://www.mysql.com/patches/Linux-sparc-2.0.30.diff. This patch is against the Linux distribution `sparclinux-2.0.30.tar.gz' that is available at vger.rutgers.edu (a version of Linux that was never merged with the official 2.0.30). You must also install LinuxThreads 0.6 or newer.

Thanks to jacques@solucorp.qc.ca for this information.

4.11.5.5 Linux-Alpha

The big problem on Linux-Alpha is that there are still some problems with threads in glibc on this platform. You should start by getting the newest glibc version you can find.

Note that before you run any programs that use threads (like mysqld, thr_alarm or thr_lock), you should raise the shared memory limit (with ulimit). The MySQL benchmarks are known to fail if you forget to do this!

Configure MySQL with the following command:

shell> CC=gcc CCFLAGS="-Dalpha_linux_port" \
       CXX=gcc CXXFLAGS="-O3 -Dalpha_linux_port -felide-constructors -fno-exceptions -fno-rtti" \
       ./configure --prefix=/usr/local/mysql

Try to compile mysys/thr_lock and mysys/thr_alarm. Test that these programs work! (Invoke each one with no arguments. Each should end with test_succeeded if everything was okay.)

After installing MySQL, uncomment the ulimit command in safe_mysqld and add options to increase shared memory.

Note that Linux-Alpha is still an alpha-quality platform for MySQL. With the newest glibc, you have a very good chance of it working.

If you have problems with signals (MySQL dies unexpectedly under high load) you may have found an OS bug with threads and signals. In this case you can tell MySQL not to use signals by configuring with:

shell> CFLAGS=-DDONT_USE_THR_ALARM \
       CXXFLAGS=-DDONT_USE_THR_ALARM \
       ./configure ...

This doesn't affect the performance of MySQL, but has the side effect that you can't kill clients that are ``sleeping'' on a connection with mysqladmin kill or mysqladmin shutdown. Instead, the client will die when it issues its next command.

4.11.5.6 MkLinux

MySQL should work on MkLinux with the newest glibc package (tested with glibc 2.0.7).

4.11.5.7 Qube2 Linux

To get MySQL to work on Qube2, (Linux Mips), you need the newest glibc libraries (glibc-2.0.7-29C2 is known to work). You must also use the egcs C++ compiler (egcs-1.0.2-9 or newer).

4.11.6 Alpha-DEC-Unix

When compiling threaded programs under Digital UNIX, the documentation recommends using the -pthread option for cc and cxx and the libraries -lmach -lexc (in addition to -lpthread). You should run configure something like this:

shell> CC="cc -pthread" CXX="cxx -pthread -O" \
       ./configure --with-named-thread-libs="-lpthread -lmach -lexc -lc"

When compiling mysqld, you may see a couple of warnings like this:

mysqld.cc: In function void handle_connections()':
mysqld.cc:626: passing long unsigned int *' as argument 3 of
accept(int,sockadddr *, int *)'

You can safely ignore these warnings. They occur because configure can detect only errors, not warnings.

If you start the server directly from the command line, you may have problems with it dying when you log out. (When you log out, your outstanding processes receive a SIGHUP signal.) If so, try starting the server like this:

shell> nohup mysqld [options] &

nohup causes the command following it to ignore any SIGHUP signal sent from the terminal. Alternatively, start the server by running safe_mysqld, which invokes mysqld using nohup for you.

4.11.7 Alpha-DEC-OSF1

If you have problems compiling and have DEC CC and gcc installed, try running configure like this:

shell> CC=cc CFLAGS=-O CXX=gcc CXXFLAGS=-O3 \
       ./configure --prefix=/usr/local/mysql

If you get problems with the `c_asm.h' file, you can create and use a 'dummy' `c_asm.h' file with:

shell> touch include/c_asm.h
shell> CC=gcc CFLAGS=-I./include \
       CXX=gcc CXXFLAGS=-O3 \
       ./configure --prefix=/usr/local/mysql

On OSF1 V4.0D and compiler "DEC C V5.6-071 on Digital UNIX V4.0 (Rev. 878)" the compiler had some strange behavior (undefined asm symbols). /bin/ld also appears to be broken (problems with _exit undefined errors occuring while linking mysqld). On this system, we have managed to compile MySQL with the following configure line, after replacing /bin/ld with the version from OSF 4.0C:

shell> CC=gcc CXX=gcc CXXFLAGS=-O3 ./configure --prefix=/usr/local/mysql

In some versions of OSF1, the alloca() function is broken. Fix this by removing the line in `config.h' that defines 'HAVE_ALLOCA'.

The alloca() function also may have an incorrect prototype in /usr/include/alloca.h. This warning resulting from this can be ignored.

configure will use the following thread libraries automatically: --with-named-thread-libs="-lpthread -lmach -lexc -lc".

When using gcc, you can also try running configure like this:

shell> CFLAGS=-D_PTHREAD_USE_D4 CXX=gcc CXXFLAGS=-O3 ./configure ....

If you have problems with signals (MySQL dies unexpectedly under high load) you may have found an OS bug with threads and signals. In this case you can tell MySQL not to use signals by configuring with:

shell> CFLAGS=-DDONT_USE_THR_ALARM \
       CXXFLAGS=-DDONT_USE_THR_ALARM \
       ./configure ...

This doesn't affect the performance of MySQL, but has the side effect that you can't kill clients that are ``sleeping'' on a connection with mysqladmin kill or mysqladmin shutdown. Instead, the client will die when it issues its next command.

4.11.8 SGI-Irix

You may have to undefine some things in `config.h' after running configure and before compiling.

In some Irix implementations, the alloca() function is broken. If the mysqld server dies on some SELECT statements, remove the lines from `config.h' that define HAVE_ALLOC and HAVE_ALLOCA_H. If mysqladmin create doesn't work, remove the line from `config.h' that defines HAVE_READDIR_R. You may have to remove the HAVE_TERM_H line as well.

SGI recommends that you install all of the patches on this page as a set: http://support.sgi.com/surfzone/patches/patchset/6.2_indigo.rps.html

At the very minimum, you should install the latest kernel rollup, the latest rld rollup, and the latest libc rollup.

You definately need all the POSIX patches on this page, for pthreads support:

http://support.sgi.com/surfzone/patches/patchset/6.2_posix.rps.html

If you get the something like the following error when compiling `mysql.cc':

"/usr/include/curses.h", line 82: error(1084): invalid combination of type

Then type the following in the top-level directory of your MySQL source tree:

shell> extra/replace bool curses_bool < /usr/include/curses.h > include/curses.h
shell> make

There have also been reports of scheduling problems. If only one thread is running, things go slow. Avoid this by starting another client. This may lead to a 2-to-10-fold increase in execution speed thereafter for the other thread. This is a poorly-understood problem with Irix threads; you may have to improvise to find solutions until this can be fixed.

If you are compiling with gcc, you can use the following configure command:

shell> CC=gcc CXX=gcc CXXFLAGS=-O3 \
       ./configure --prefix=/usr/local/mysql --with-thread-safe-client \
       --with-named-thread-libs=-lpthread

4.11.9 FreeBSD

If you notice that configure will use MIT-pthreads, you should read the MIT-pthreads notes. 4.9 Remarques sur MIT-pthreads.

If you get an error from make install that it can't find `/usr/include/pthreads', configure didn't detect that you need MIT-pthreads. This is fixed by executing these commands:

shell> rm config.cache
shell> ./configure --with-mit-threads

The behavior of FreeBSD make is slightly different from that of GNU make. If you have make-related problems, you should install GNU make.

If mysql or mysqladmin takes a long time to respond, a user said the following:

Are you running the ppp user process? On one FreeBSD box (2.2.5) MySQL clients takes a couple of seconds to connect to mysqld if the ppp process is running.

FreeBSD is also known to have a very low default file handle limit. 18.10 File not found.

If you have a problem with SELECT NOW() returning values in GMT and not your local time, you have to set the TZ environment variable to your current timezone. This should be done for the environment in which the server runs, for example, in safe_mysqld or mysql.server.

Make sure that the localhost entry in the `/etc/hosts' file is correct (otherwise you will have problems connecting to the database). The `/etc/hosts' file should start with a line:

127.0.0.1       localhost localhost.your.domain

If you are using FreeBSD 2.2.6, don't forget to apply the ttcp and mmap-22 patches to the OS (for security reasons). Please see http://www.freebsd.org for these CERT patches.

If you are using FreeBSD 2.2.7 and you have problems killing the mysqld daemon, you should get new sources using cvsup and recompile libc_r.

4.11.9.1 FreeBSD-3.0

You have to run configure with the --with-named-thread-libs=-lc_r option.

The pthreads library for FreeBSD doesn't contain the sigwait() function and there are some bugs in it. To fix this, get the `FreeBSD-3.0-libc_r-1.0.diff' file from the FreeBSD area of the MySQL FTP site and apply it in the `/usr/src/lib/libc_r/uthread' directory. Then follow the instructions that can be found with man pthread about how to recompile the libc_r library.

You can test if you have a ``modern'' libpthread.a with this command:

shell> nm /usr/lib/libc_r.a | grep sigwait

If the above doesn't find sigwait, you must use the patch above and recompile libc_r.

4.11.10 NetBSD

To compile on NetBSD you need GNU make. Otherwise the compile will crash when make tries to run lint on C++ files.

4.11.11 BSD/OS

4.11.11.1 BSD/OS 2.x

If you get the following error when compiling MySQL, your ulimit value for virtual memory is too low:

item_func.h: In méthode `Item_func_ge::Item_func_ge(const Item_func_ge &)':
item_func.h:28: virtual memory exhausted
make[2]: *** [item_func.o] Error 1

Try using ulimit -v 80000 and run make again. If this doesn't work and you are using bash, try switching to csh or sh; some BSDI users have reported problems with bash and ulimit.

If you are using gcc, you may also use have to use the --with-low-memory flag for configure to be able to compile `sql_yacc.cc'.

If you have a problem with SELECT NOW() returning values in GMT and not your local time, you have to set the TZ environment variable to your current timezone. This should be done for the environment in which the server runs, for example in safe_mysqld or mysql.server.

4.11.11.2 BSD/OS 3.x

Upgrade to BSD/OS 3.1. If that is not possible, install BSDIpatch M300-038.

Use the following command when configuring MySQL:

shell> env CXX=shlicc++ CC=shlicc2 \
       ./configure \
           --prefix=/usr/local/mysql \
           --localstatedir=/var/mysql \
           --without-perl \
           --with-unix-socket-path=/var/mysql/mysql.sock

The following is also known to work:

shell> env CC=gcc CXX=gcc CXXFLAGS=-O3 \
       ./configure \
           --prefix=/usr/local/mysql \
           --with-unix-socket-path=/var/mysql/mysql.sock

You can change the directory locations if you wish, or just use the defaults by not specifying any locations.

If you have problems with performance under heavy load, try using the --skip-thread-priority option to safe_mysqld! This will run all threads with the same priority; on BSDI 3.1, this gives better performance (at least until BSDI fixes their thread scheduler).

If you get the error virtual memory exhausted while compiling, you should try using ulimit -v 80000 and run make again. If this doesn't work and you are using bash, try switching to csh or sh; some BSDI users have reported problems with bash and ulimit.

4.11.11.3 BSD/OS 4.x

BSDI 4.x has some thread related bugs. If you want to use MySQL on this, you should install all thread related patches. At least M400-023 should be installed.

4.11.12 SCO

The current port is tested only on a ``sco3.2v5.0.4'' and ``sco3.2v5.0.5'' system. There has also been a lot of progress on a port to ``sco 3.2v4.2''.

1. For OpenServer 5.0.X you need to use GDS in Skunkware 95 (95q4c). This is necessary because GNU gcc 2.7.2 in Skunkware 97 does not have GNU as. You can also use egcs 1.1.2 or newer http://www.egcs.com/. If you are using egcs 1.1.2 you have to execute the following command:

   shell> cp -p /usr/include/pthread/stdtypes.h 
   /usr/local/lib/gcc-lib/i386-pc-sco3.2v5.0.5/egcs-2.91.66/include/pthread/
   

2. You need the port of GCC 2.5.? for this product and the Development system. They are required on this version of SCO UNIX. You cannot just use the GCC Dev system.
3. You should get the FSU Pthreads package and install it first. This can be found at http://www.cs.wustl.edu/~schmidt/ACE_wrappers/FSU-threads.tar.gz. You can also get a precompiled package from ftp://www.mysql.com/pub/mysql/Downloads/SCO/FSU-threads-3.5c.tar.gz.
4. FSU Pthreads can be compiled with SCO UNIX 4.2 with tcpip. Or OpenServer 3.0 or Open Desktop 3.0 (OS 3.0 ODT 3.0), with the SCO Development System installed using a good port of GCC 2.5.X ODT or OS 3.0 you will need a good port of GCC 2.5.? There are a lot of problems without a good port. The port for this product requires the SCO UNIX Development system. Without it, you are missing the libraries and the linker that is needed.
5. To build FSU Pthreads on your system, do the following:
   1. Run ./configure in the `threads/src' directory and select the SCO OpenServer option. This command copies `Makefile.SCO5' to `Makefile'.
   2. Run make.
   3. To install in the default `/usr/include' directory, login as root, then cd to the `thread/src' directory, and run make install.
6. Remember to use GNU make when making MySQL.
7. On OSR 5.0.5, you should use the following configure line:

   shell> CC="gcc -DSCO" CXX="gcc -DSCO" ./configure
   

   The -DSCO is needed to help configure detect some thread functions properly. If you forget -DSCO, you will get the following error message while compiling:

   my_pthread.c: In function `my_pthread_mutex_init':
   my_pthread.c:374: `pthread_mutexattr_default' undeclared (first use this function)
   

8. If you don't start safe_mysqld as root, you probably will get only the default 110 open files per process. mysqld will write a note about this in the log file.
9. With SCO 3.2V5.0.5, you should use a FSU Pthreads version 3.5c or newer. The following configure command should work:

   shell> CC="gcc -belf" ./configure --prefix=/usr/local/mysql --disable-shared
   

10. With SCO 3.2V4.2, you should use a FSU Pthreads version 3.5c or newer. The following configure command should work:

    shell> CFLAGS="-D_XOPEN_XPG4" CXX=gcc CXXFLAGS="-D_XOPEN_XPG4" \
           ./configure \
               --with-debug --prefix=/usr/local/mysql \
               --with-named-thread-libs="-lgthreads -lsocket -lgen -lgthreads" \
               --with-named-curses-libs="-lcurses"
    

    You may get some problems with some include files. In this case, you can find new SCO-specific include files at ftp://www.mysql.com/pub/mysql/Downloads/SCO/SCO-3.2v4.2-includes.tar.gz. You should unpack this file in the `include' directory of your MySQL source tree.

SCO development notes:

• MySQL should automatically detect FSU Pthreads and link mysqld with -lgthreads -lsocket -lgthreads.
• The SCO development libraries are reentrant in FSU Pthreads. SCO claims that its libraries' functions are reentrant, so they must be reentrant with FSU Pthreads. FSU Pthreads on OpenServer tries to use the SCO scheme to make reentrant library.
• FSU Pthreads (at least the version at www.mysql.com) comes linked with GNU malloc. If you encounter problems with memory usage, make sure that `gmalloc.o' is included in `libgthreads.a' and `libgthreads.so'.
• In FSU Pthreads, the following system calls are pthreads-aware: read(), write(), getmsg(), connect(), accept(), select() and wait().

If you want to install DBI on SCO, you have to edit the `Makefiles' in DBI-xxx and each subdirectory:

OLD:                                  NEW:
CC = cc                               CC = gcc -belf
CCCDLFLAGS = -KPIC -W1,-Bexport       CCCDLFLAGS = -fpic
CCDLFLAGS = -wl,-Bexport              CCDLFLAGS =

LD = ld                               LD = gcc -belf -G -fpic
LDDLFLAGS = -G -L/usr/local/lib       LDDLFLAGS = -L/usr/local/lib
LDFLAGS = -belf -L/usr/local/lib      LDFLAGS = -L/usr/local/lib

LD = ld                               LD = gcc -belf -G -fpic
OPTIMISE = -Od         		      OPTIMISE = -O1

OLD:
CCCFLAGS = -belf -dy -w0 -U M_XENIX -DPERL_SCO5 -I/usr/local/include

NEW:
CCFLAGS = -U M_XENIX -DPERL_SCO5 -I/usr/local/include

This is because the Perl dynaloader will not load the DBI modules if they were compiled with icc or cc.

Perl works best when compiled with cc.

4.11.13 SCO Unixware 7.0 notes

You must use a version of MySQL at least as recent as 3.22.13, since that version fixes some portability problems under Unixware.

We have been able to compile MySQL with the following configure command on UnixWare 7.0.1:

shell> CC=cc CXX=CC ./configure --prefix=/usr/local/mysql

4.11.14 IBM-AIX

Automatic detection of xlC is missing from Autoconf, so a configure command something like this is needed when using the IBM compiler:

shell> CC="xlc_r -ma -O3 -qstrict -DHAVE_INT_8_16_32" \
       CXX="xlC_r -ma -O3 -qstrict -DHAVE_INT_8_16_32" \
       ./configure

If you are using egcs to compile MySQL, you MUST use the -fno-exceptions flag, as the exception handling in egcs is not thread-safe! (This is tested with egcs 1.1.) We recommend the following configure line with egcs and gcc on AIX:

shell> CXX=gcc \
       CXXFLAGS="-felide-constructors -fno-exceptions -fno-rtti" \
       ./configure --prefix=/home/monty --with-debug --with-low-memory

If you have problems with signals (MySQL dies unexpectedly under high load) you may have found an OS bug with threads and signals. In this case you can tell MySQL not to use signals by configuring with:

shell> CFLAGS=-DDONT_USE_THR_ALARM CXX=gcc \
       CXXFLAGS="-felide-constructors -fno-exceptions -fno-rtti -DDONT_USE_THR_ALARM" \
       ./configure --prefix=/home/monty --with-debug --with-low-memory

This doesn't affect the performance of MySQL, but has the side effect that you can't kill clients that are ``sleeping'' on a connection with mysqladmin kill or mysqladmin shutdown. Instead, the client will die when it issues its next command.

4.11.15 HP-UX

There are a couple of ``small'' problems when compiling MySQL on HP-UX. We recommend that you use gcc instead of the HP-UX native compiler, because gcc produces better code!

We recommend one to use gcc 2.95 on HP-UX. Don't use high optimization flags (like -O6) as this may not be safe on HP-UX.

Note that MIT-pthreads can't be compiled with the HP-UX compiler, because it can't compile .S (assembler) files.

The following configure line should work:

CFLAGS="-DHPUX -I/opt/dce/include" CXXFLAGS="-DHPUX -I/opt/dce/include 
-felide-constructors -fno-exceptions -fno-rtti" CXX=gcc ./configure --with-pthread 
--with-named-thread-libs='-ldce' --prefix=/usr/local/mysql --disable-shared

If you are compiling gcc 2.95 yourself, you should NOT link it with the DCE libraries (libdce.a or libcma.a) if you want to compile MySQL with MIT-pthreads. If you mix the DCE and MIT-pthreads packages you will get a mysqld to which you cannot connect. Remove the DCE libraries while you compile gcc 2.95!