# Makefile.in generated by automake 1.9.5 from Makefile.am. # doc/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # # Makefile for crossfire 0.95.0 and beyond # # This file will eventually be replaced by a configure script. But for # now, this simple makefile should do the job. # # Copyright (C) 1992 Frank Tore Johansen # Copyright (C) 2001 Mark Wedel # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # # The author can be reached via e-mail to mwedel@scruz.net srcdir = . top_srcdir = .. pkgdatadir = $(datadir)/crossfire pkglibdir = $(libdir)/crossfire pkgincludedir = $(includedir)/crossfire top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = /usr/local/gcc/bin/install -c install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = sparc-sun-solaris2.9 host_triplet = sparc-sun-solaris2.9 subdir = doc DIST_COMMON = README $(dist_man6_MANS) $(dist_noinst_DATA) \ $(dist_noinst_SCRIPTS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs CONFIG_HEADER = $(top_builddir)/include/autoconf.h CONFIG_CLEAN_FILES = SCRIPTS = $(dist_noinst_SCRIPTS) SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive man6dir = $(mandir)/man6 am__installdirs = "$(DESTDIR)$(man6dir)" NROFF = nroff MANS = $(dist_man6_MANS) DATA = $(dist_noinst_DATA) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /src/crossfire-1.8.0/utils/missing --run aclocal-1.9 AMDEP_FALSE = # AMDEP_TRUE = AMTAR = ${SHELL} /src/crossfire-1.8.0/utils/missing --run tar AR = ar AUTOCONF = ${SHELL} /src/crossfire-1.8.0/utils/missing --run autoconf AUTOHEADER = ${SHELL} /src/crossfire-1.8.0/utils/missing --run autoheader AUTOMAKE = ${SHELL} /src/crossfire-1.8.0/utils/missing --run automake-1.9 AWK = gawk BASENAME = /usr/bin/basename BUNZIP = /usr/bin/bunzip2 BZIP = /usr/bin/bzip2 CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -g -O2 COMPRESS = /usr/bin/compress CPP = gcc -E CPPFLAGS = CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -g -O2 CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = egrep EXEEXT = F77 = g77 FFLAGS = -g -O2 GUNZIP = /usr/bin/gunzip GZIP = /usr/bin/gzip HAVE_LIBDL_FALSE = # HAVE_LIBDL_TRUE = HAVE_X_FALSE = # HAVE_X_TRUE = INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s LATEX = LDFLAGS = LEX = flex LEXLIB = -ll LEX_OUTPUT_ROOT = lex.yy LIBOBJS = LIBS = -lcrypt -lm -lsocket -lnsl LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = MAINT = # MAINTAINER_MODE_FALSE = MAINTAINER_MODE_TRUE = # MAKEINFO = ${SHELL} /src/crossfire-1.8.0/utils/missing --run makeinfo OBJEXT = o PACKAGE = crossfire PACKAGE_BUGREPORT = crossfire-devel@listserv.real-time.com PACKAGE_NAME = crossfire PACKAGE_STRING = crossfire 1.8.0 PACKAGE_TARNAME = crossfire PACKAGE_VERSION = 1.8.0 PATH_SEPARATOR = : PERL = /usr/local/bin/perl PLUGIN_PYTHON = PYTHON_LIB = PYTHON_PLUGIN_FALSE = PYTHON_PLUGIN_TRUE = # PY_INCLUDES = -I/usr/local/include/python2.4 PY_LIBS = RANLIB = ranlib SET_MAKE = SHELL = /bin/bash STRIP = strip TAR = /usr/local/bin/tar UNCOMPRESS = /usr/bin/uncompress VERSION = 1.8.0 X11LIBS = -L/usr/openwin/lib -R/usr/openwin/lib -lXaw -lX11 -lICE -lSM -lXext -lXt -lXmu -lXpm -lz X_CFLAGS = -I/usr/openwin/include X_EXTRA_LIBS = X_LIBS = -L/usr/openwin/lib -R/usr/openwin/lib X_PRE_LIBS = -lSM -lICE ac_ct_AR = ar ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_F77 = g77 ac_ct_RANLIB = ranlib ac_ct_STRIP = strip am__fastdepCC_FALSE = # am__fastdepCC_TRUE = am__fastdepCXX_FALSE = # am__fastdepCXX_TRUE = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = sparc-sun-solaris2.9 build_alias = build_cpu = sparc build_os = solaris2.9 build_vendor = sun datadir = ${prefix}/share exec_prefix = ${prefix} host = sparc-sun-solaris2.9 host_alias = host_cpu = sparc host_os = solaris2.9 host_vendor = sun includedir = ${prefix}/include infodir = ${prefix}/info install_sh = /src/crossfire-1.8.0/utils/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localstatedir = ${prefix}/var mandir = ${prefix}/man mkdir_p = mkdir -p -- no_x = oldincludedir = /usr/include pkgconfdir = ${prefix}/etc/crossfire pkgstatedir = ${prefix}/var/crossfire prefix = /usr/local/crossfire program_transform_name = s,x,x, sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com sysconfdir = ${prefix}/etc target_alias = x_includes = /usr/openwin/include x_libraries = /usr/openwin/lib SUBDIRS = scripts Developers playbook spoiler spell-docs spoiler-html playbook-html dist_noinst_DATA = handbook.ps spoiler.ps dist_noinst_SCRIPTS = include_html.pl dist_man6_MANS = crossedit.man crossfire.man crossfire-config.man \ crossloop.web.man crossloop.man EXTRA_DIST = Crossedit.doc PlayerStats \ README RunTimeCommands SurvivalGuide alchemy.doc \ experience metaserver multigod plugins skills.doc \ spellcasters_guide_to_runes DTOP = $(top_srcdir)/$(PACKAGE)-doc all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-man6: $(man6_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man6dir)" || $(mkdir_p) "$(DESTDIR)$(man6dir)" @list='$(man6_MANS) $(dist_man6_MANS) $(nodist_man6_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.6*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 6*) ;; \ *) ext='6' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man6dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man6dir)/$$inst"; \ done uninstall-man6: @$(NORMAL_UNINSTALL) @list='$(man6_MANS) $(dist_man6_MANS) $(nodist_man6_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.6*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 6*) ;; \ *) ext='6' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man6dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man6dir)/$$inst"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(SCRIPTS) $(MANS) $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(man6dir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-man install-exec-am: install-info: install-info-recursive install-man: install-man6 installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-local uninstall-man uninstall-info: uninstall-info-recursive uninstall-man: uninstall-man6 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ clean clean-generic clean-libtool clean-recursive ctags \ ctags-recursive distclean distclean-generic distclean-libtool \ distclean-recursive distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-man6 install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am \ uninstall-local uninstall-man uninstall-man6 spoiler.ps: (cd spoiler; $(MAKE) spoiler) handbook.ps: (cd playbook; $(MAKE) handbook) crosslib.doc: (cd ../common; make doc) # workaround for bug in automake 1.6.2 & 1.6.3 (& probably others) uninstall-local: rm -f $(DESTDIR)$(man6dir)/crossedit.6* rm -f $(DESTDIR)$(man6dir)/crossfire.6* rm -f $(DESTDIR)$(man6dir)/crossfire-config.6* archive: spoiler playbook $(mkinstalldirs) $(DTOP) cp $(EXTRA_DIST) $(DTOP) cp spoiler.ps handbook.ps $(DTOP) cp spell-docs/*.txt spell-docs/*.ps $(DTOP) (cd spoiler-html ; make archive ) (cd playbook-html ; make archive ) (cd $(DTOP)/..; gtar --exclude=CVS -cvhzf $(PACKAGE)-$(VERSION).doc.tar.gz `$(BASENAME) $(DTOP)`) $(RM) -rf $(DTOP) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: